March 21, 2020
Description
During the current Corona epidemy I wanted to share my model that I have been creating to minimize contact to surfaces that are touched by many people.
The design is inspired by a lot of other models I saw online. However not many had a housing so I decided to make my own.
If you finished the print add a rubber band so that the locking mechanism works.
The model is intended to be printed quickly with a layer height of 0.3 mm. With this setting it prints each part in approx. 1hr.
The pusher is best printed laying flat on the side. The housing upright and depending on your bed adhesion maybe with a raft.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
dr.dentz
