Stove Igniter Safety Cap for Whirlpool (1.2mm thick)

Safety Cap for your Whirlpool stove igniters. Our stove activates all 4 igniters when pressing any igniter.  To eliminate accidentally triggering them when setting things on the stove top, I designed these caps. It also helps identify which burner is on when the cap is removed and can be a helpful visual aid if the cap is off that your burner may still be on.  These caps can also save you from getting a good shock when cleaning the stove.

Ideally, these caps should be printed in ASA or any filament you think can stand up to accidentally bumping into it with something hot.  My initial test shown in the photos used PLA, but we set a cookie sheet on the stove and bumped the cap with it melting the top (as you can see in the second picture. 

This was designed with 1.2mm thick walls to accommodate for two wall thick printing with 0.6mm nozzles, or 3 walls with 0.4mm nozzles.

I have a Vase Mode version of this stove cap for printing with a 0.6mm nozzle in another model.  This one is thicker and a tad more durable but the Vase Mode one functions just as well, but prints quite a bit faster.