Headband for Protective Face Shield (RC2 type)

Update: Don't want to delete the post, but this version has been further reduced in size and improved, so here are links to the newer versions:

For the original Shield (240 x 240 mm), here:

https://www.prusaprinters.org/prints/27623-headband-brasil-v3

For A4 size Shield (Portrait or Landscape), here:

https://www.prusaprinters.org/prints/27750-headband-europa-v3-for-a4-format

---

Original post:

This is a modification of the original design, with total height reduced from 20 mm to 15 mm for increased printing speed (You print 3 for the time of 2 before). Also the hex openings have been rotated by 30 degrees to eliminate horizontal walls.

Two versions uploaded here, one with hex and one without, so few have requested no hex design.

You can download the ready to go STL file or a STEP if you would like to make easier modifications.

On the side it says "170 mm" as this is the width between the end vertical plates. Later on a narrower versions will come as some find it too wide.

The 3D printed headband information presented here is intended to assist the general public during the current global pandemic related to COVID-19 and the related nationwide shortage of personal protective equipment. Please be aware that this headband design is not intended to replace standard protective equipment when that equipment is available. The use of these 3D printed headbands has not been fully tested and has not been approved by federal or state authorities. The individuals associated with developing and producing this headband design assume no liability and make no representations, warranties, or guarantees regarding the safety, efficacy, or appropriate use of these headbands in any particular situation. Each facility should test each batch of headbands prior to relying on them for protection. Use of this information for any purpose is at the maker’s and user’s own risk.