August 23, 2022
Description
30 * 20 * 1.5mm, fine toothed comb. Could never find a good tight toothed comb so I designed one. I have a ridiculous number of these around, in the little jeans pocket, in wallet, in rucksack, on desk, bedside table & etc.
Designed to print with a 0.4mm nozzle. Each tooth is 2 extrusion widths (0.8mm wide, except end ones which are 1mm). Needs a fairly weel levelled bed as elephent foot compension doesn't really work on this. Have printed in eSun PLA+ and eSun PETG before now, both seem good.
Works really well as a test print as is only about 6 minutes.
License:
Creative Commons — Attribution — Noncommercial
aibohphobia
