Shower Caddy Hook

An all-in-one shower caddy hook to support shower caddies that do not fit shower heads. The hook also has two towel spots to hang wet/dry towels. The structure was designed for the weight to be placed on top of the glass walls of the shower.

• Best Print Orientation has been included
• Print Settings
  • Material: PLA+
  • Layers: 0.2mm
  • Infill: 60% - Gyroid
  • Walls: 10 Walls / Floors
  • Supports: Snug / 0.2mm Z Gap

Assembly Required:

• M4 Hex Nuts
• M4 Bolts Lengths
  • 1 x 35mm
  • 2 x 40mm

Glass pads have been included but may vary based on shower setup.