COB LED mount for RC Car

Made this LED mount for a 100x20mm COB LED. you can attatch it to the roof from outside, but it will be high. so i simply made a long cut to the top of the windshield, and attatched from inside. You'll need 4-6 pc of M3 screws for attatching the parts for the body. I left the back plate plain, so you can drill the mounting holes as you like. There are 2 different back plates: One is 90 degree and the other is tilted by 22.5 degrees. if you have any questions, feel free to ask.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.2

Infill:

Category: R/C Vehicles