Shroud for DropEffect XG hotend, orbiter extruder 2.0, linear rails - ender3/pro/v2

No print support needed!

For MGN12H

Consider this experimental for now. it works but there is room for improvement, keep an eye on the bltouch. No issue so far with PLA and part cooling fan on at 100%

Screw length (might be some small mistake, but should mostly correct)

• 4x M3x... for linear block mount (different length for top and bottom screws, somewhere around 10mm long, but double check) 
• 2x M3x25 for hotend mount (use ender3 add-on)
• 4x M3x12 for main part to the belt holder.
• 2x M2x12 (bottom fan screws)
• 2x M2x8 (top fan screws)
• 2x M3x6 - flat head - accessories screws included with the hotend
• 2x M3x25 - hotend mount
• optional M3x6mm - flat head - for extra mounting point - not very accessible but doable - behind everything, has to be installed after the it's mounted on the rail, but before the belt mount printed piece is attached.

Heat inserts - M3, 4mm length, 4.6/5mm OD

• 4x belt mount piece
• 2x for probe
• 2x for hotend mount

You will need to relocate the x endstop
you can use my design: https://www.printables.com/model/265936-relocated-x-endstop-for-ender3-machines-using-line 

------

Support me on Patreon so I can make more stuff!
You also get access to the STEP file as a bonus (and other models)

https://patreon.com/squirrelf3d