Flsun SR dragon hotend mount (current version v1.2)
- Effector plate modification required !!! (expand hotend center hole to HS size, min. r11.2)
- Designed for M3 5.6mm brass insets
- For hotend holder use 4x M3 16mm screws
- Two resized fanducts, v1 works ok with 5015 fans ( 5015 fans mount https://www.thingiverse.com/thing:5029623)
Changelog:
v1.1
v1.2
- Fixed holes spacing for effector plate mount
Print Settings
Printer:
Flsun SR
Supports:
Resolution:
0.15
Infill:
Filament:
Polymaker Polymax PETG
Notes:
Cura slicer settings
* 4-5 walls
* 250C printing temp.(E3D volcano + Slicer eng. bi-metal heatbrake)
* 80C initial layer build plate temp.
* 68C build plate temp.
* 40mm/s walls speed
* 50mm/s infill speed
* 6mm retraction (Capricorn PTFE)
* 40mm/s retraction speed (E3D Hemera)
* 15% fan speed
* 5mm brim
Category: 3D Printer Parts
xPakrikx
