August 27, 2022
Description
This is an antenna mount for the 2.4Ghz ExpressLRS antenna for the GEPRC Smart35.
It can be used on the back or the front, depending where you mount your receiver and the length of your antenna cable.
It may work on other frames but it was designed and it's been used in a GEPRC Smart35
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
No
Resolution:
200
Infill:
30
Filament:
Saintsmart TPU
Notes:
No raft, no support, nothing needed. Just lay it down on the bottom side and print it.
Then check that the holes are opened, or push through with some tool.
To insert the antenna, get one side full in, and then bend the antenna mount of the other side together with bending the other side of the antenna carefully until you get it in.
License:
Creative Commons — Attribution
6
Nordfpv
