BiQu H2 (V2,V2S) fanduct for single / dual 5015 Fan - standart / volcano heatblock

 BiQu H2 fanduct for a single 5015 fan

Parts Needed:

• 2x  M2.5 x 6 countersunk screws
• 2x  M3 Nuts
• 2x   M3 x 24 screws

Printsettings:

• Layerhight: < 0.15mm 
• Support Needed

 BiQu H2 fanduct for a Dual 5015 fan

Parts Needed:

• 2x  M2.5 x 6 countersunk screws
• 2x  M3 Nuts
• 2x   M3 x 20 screws
• 2x   M3 x 24 screws

Printsettings:

• Layerhight: < 0.15mm 
• Support Needed

Recommended printing in ASA/ABS or other temperature resistant filaments like PC

Assembly tips:

1. Mount the fanduct to the H2 with the M2.5x6 countersunk screws
2. Mount the fans to the duct with the M3x20 and M3x24 screws and M3 nuts

Testprints:

The BENCHY was printed with eSUN Silk PLA in 40 min @ 

• FanSpeed: 100% 
• Layer High: 0,2 

The Overhang test was printed with eSUN PLA+ in  18min @ FanSpeed 100%.

• FanSpeed: 100% 
• Layer High: 0,15