April 14, 2023
Description
The cover can be printed with any material (ABS recommended) with any layer hight from 0.3 to 0.1 mm
The seal has to be printed out of TPU or any other suitable FLEX filament.
Even though the seal is optional, concider that a well fitted seal keeps moisture and dirt away from the delicate connection pins. It will also work as a spring to press the cover against the latches.
Attention: The seal has to be assembled with its bulge side facing towards cover!
Attached the .f3d, so you may add a logo or text as you desire
Assembly:
Fit the Seal with the bulged side towards the cover!
Category: 3D Printing
License:
Creative Commons — Attribution — Noncommercial
8
firstgizmo
