Fluke - Rugged Case with foam insert

The case is based on my parameterizable "Rugged Box".

Inner dimensions: 130 x 185 x 65 mm (Bottom height: 50 mm)

Support my work

For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).

If you want to support my work directly, you can buy me a coffee.

If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |

Also check out my other models.

Printing the lid with logo (on a single filament printer)

The 3mf file has the lid and logo aligned already.

Print the logo first (one layer high), remove the skirt, change the filament and then print the lid.

Updates

27.12.2022:

• Added lid without logo

Assembly

You will need six M3x30 screws to assemble it.

Foam insert

The Fusion 360 file also contains a foam insert for a Fluke 115 multimeter and a Fluke VoltAlert 1AC-E II.

I cut the foam insert on my CNC router (had to split it into two parts as the height is limited). Here a timelapse of one part: