January 11, 2023
Description
Great, easy gift for a Lord of the Rings fan!
My settings for a quick printing of the Gondorian:
0.3 mm layer height
20% infill
There are 3 large parts - the base, body, and shield. All can be laid flat on the build plate.
The 4th part, the helmet's right side, is printed separate from the rest and then glued to the body. I did this so the body can be printed flat on the build plate.
Assembly of the base, body, and shield do not require any glue to assemble.
Remixed from Likon's Spartan Knife Block
He remixed his from https://www.thingiverse.com/thing:2780851 and https://www.thingiverse.com/thing:646950
License:
Creative Commons — Attribution
maethormellon
