PVC (Pretty Versitile Connector) Camera Mount Arm System

This is based on a flexible design using ¼-20 bolts and nuts and 1/2in schedule 40 PVC Pipe.  I'll publish a collection of all the different generic Joints that I design in another model.

Here we have a 1 joint or 2 joint Camera Arm with a standard 1/4in-20 thread at the end.

The base swivels, each joint rotates and locks (working on improving the holding strength of V1), and each PVC rod can rotate (and be screwed in).

I provide the Fusion 360 file if you want to make any other custom mods.. 

The .stl's are provided as full plates.  You will want to either print the 1 Joint, or 2 Joint plates, along with the Rotating Base Plate.  If you want the individual components use the "split to objects" function of prusa slicer, or I will provde them as part of the collection of all parts in another model.

Here are the Bolts Used for the 2 Joint base (1 joint model would be 6 Nuts, 3 Carriage Bolts, 2 Hex bolts):

I'll add mounts for GoPro, and Lifcams shortly as well.