Model RC Steam Train with steam effect, live view camera and working lights. Controlled from your phone. 3D Printer File Image 2

Model RC Steam Train with steam effect, live view camera and working lights. Controlled from your phone. 3D Printer File Image 3

Model RC Steam Train with steam effect, live view camera and working lights. Controlled from your phone. 3D Printer File Image 4

Model RC Steam Train with steam effect, live view camera and working lights. Controlled from your phone. 3D Printer File Image 5

Model RC Steam Train with steam effect, live view camera and working lights. Controlled from your phone. 3D Printer File Image 6

Model RC Steam Train with steam effect, live view camera and working lights. Controlled from your phone. 3D Printer File Thumbnail 2

Model RC Steam Train with steam effect, live view camera and working lights. Controlled from your phone. 3D Printer File Thumbnail 3

Model RC Steam Train with steam effect, live view camera and working lights. Controlled from your phone. 3D Printer File Thumbnail 4

Model RC Steam Train with steam effect, live view camera and working lights. Controlled from your phone.

DIY Machines

October 2, 2022

Description Comments Tags

Description

3D Print an entire RC model railway including a wifi controlled steam locomotive which streams a live video feed to your mobile and blows steam out its funnel!

Please ‘Like’ this project, it helps me and my future projects. Thank you.

Follow my detailed guide to build your very own indoor or outdoor garden railway and model train with working steam effect.

Built to an O gauge scale you can use your existing tracks or print new ones on your printer. The train itself is powered by a lithium ion battery pack (dead rail) and is controlled using wifi from your phone via the rain own onboard ad-hoc wifi network. This is all made possible thanks to the ESP32-CAM and some simple electronics.

The train track is based on the design started by Depronized. I have made some tweaks to the track included on this page (to improve printability and strength slightly).

List of items used in this project and where to find them:

ESP32-Cam (inc. programming board) https://geni.us/ESP32-CAM
Common Geared Motor (x1): https://geni.us/TT-Motor
3-way wago connectors (though the design can accommodate a 3 or 5 way if that’s what you have): (x2) https://geni.us/Wago221
Motor driver: HG7881/ L9110S (x1) https://geni.us/HG7881-Driver
5mm LED (x1): https://geni.us/LEDs
220 ohm resistor (x1): https://geni.us/Ufa2s
2 magnets for each carriage (10x3mm):
3mm brass rod : https://geni.us/3mm-Brass-Rod (30cm worth is enough)
Compact USB battery pack: https://geni.us/USB-Battery-Small
Rubber Gaskets for drive wheels 39mm ID x mm 3mm C/S (x4): https://geni.us/Gasket-39mmID-3mmCS
Bearings (3x6x2.5): https://geni.us/Bearing-3x6x2-5
Atomizer and Driver for the Steam effect (x1): https://geni.us/Atomiser
3D printing filament - I used 3D Jakes PLA for the train and PETG for the tracks as mine will be outdoors all year round. https://geni.us/3DJake

Electrical wire - I’ll also be trimming down some Female jumper wires to make easy use of their connectors:

Wire: https://geni.us/22AWGWire
Jumpers: https://geni.us/JumperWires
Some bolts: https://geni.us/NutsAndBolts

M2 x 8 ( x2 )
M2.5 x 8 ( x2 )
M3 x 8 ( x22 )
M4 x 20 ( x4 )

Paint for decorating: https://geni.us/Vallejo-Steam
Grey primer: https://geni.us/Grey-primer
Gloss finishing coat: https://geni.us/Gloss-Protection-Spray

Additional models to improve your project: https://www.etsy.com/uk/shop/DIYMachines

These are some of my favourite tools I use and can recommend:

Battery-powered glue gun: http://geni.us/BoschBatteryGlueGun

Bosch Bit Driver: https://geni.us/Bosch-Screwdriver

I use a Prusa MK3S for my projects and highly recommend both it and the Prusa Mini.
If I inspired you to take up 3D printing please consider purchasing a printer via this link: http://shop.prusa3d.com/#a_aid=diymachines

Prusa support my channel when you use that link at no cost to yourself. :)

==========

3D printed parts, wiring diagrams, FAQ etc can be found here: https://www.diymachines.co.uk/wifi-3d-printed-steam-train-with-live-view-camera

Projects Discord Channel: https://discord.gg/rtYGrSfJeP

==========

SAY THANKS:

Provide continual and dependable support through Patreon: https://www.patreon.com/diymachines
Or join this channel on Youtube Memberships: https://www.youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ/join
Buy me a coffee to say thanks: https://ko-fi.com/diymachines

SUBSCRIBE: ■ https://www.youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1
INSTAGRAM: https://www.instagram.com/diy_machines
FACEBOOK: https://www.facebook.com/diymachines/
ETSY: https://www.etsy.com/uk/shop/DIYMachines

==========
List of camera and lighting equipment I use: