August 30, 2022
Description
Knob adapter to 1/4"-20 photo nut. Uses metallic nut easily available, version that has wire hook. Wire hook is removed and only nut body is used.
Prints in two parts that fit together and need to be glued after metallic nut is inserted.
When inserting metallic nut into plastic cap, pay attention that nut has two side holes left after wire is removed and cap has two small bumps that should snap into those holes. align them.
This allows you to have metallic screw with nice and practical plastic knob.
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.3
Infill:
15%
Filament: gembird PETG white
Notes:
Print with resolution as you like. 0.3 is perfectly OK. Use three walls for better strength, just to be safe. two walls is also OK.
Prints in two parts. No need for support. All elements snap to each other, but should be glued for final.License:
Creative Commons — Attribution — Noncommercial
Pedja
