Vive Stock MK2: Adjustable length & height, sling swivels

New version of my Vive gun stock with attachment by a cup instead of a clip.

• Adjustable height range of 3 3/4 inch (95 mm)
• Adjustable length of pull from 12 inch to 15 inch (305mm to 381mm)
• 100% printed construction, no fasteners or glue needed
• Sling swivels, can be used to hold the stock on your person while not using it in a game
• More rigid than my previous design
• Can be used with my compact gun controller for the foregrip: https://www.thingiverse.com/thing:2558333
• Vertical foregrip option
• Shortened comb for less interference with HMD
• Does not obscure any infrared sensors, unlike some other designs

The longest part is 184mm long, except the vertical foregrip part which is as long as I could make it and fit on my i3 MK2 (297mm and rotated by 39 degrees).

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.3mm

Infill:

Notes:

Parts that need support material:

• Stock Lower.stl (Only needed to support the top screwhole.)
• Stock Upper.stl (To support the curvature of the stock. Turn on "support on build plate only", or your slicer's equivalent, to prevent it from building supports inside the sling swivel holes)

For best results, print the screw threads with 0.1mm layers. In Stock Lower.stl, only the top screwhole needs to be printed this way, the bottom one being sideways doesn't need it.

Category: Video Games