Vallejo Paint Stand

Features:

• Different versions of the parts so you can customize it for your needs.
• Relatively short print times.
• Assembly with little to no glue.
• Small overall size.

Before you start printing choose a Horizontal for how many paint tubes across you want for your stand (5 pictured above), and a Vertical for how high you want (3 pictured above).

You will need a Horizontal plate for each layer high you want and one corresponding Support. If built for 5 wide or less only 2 Verticals are needed, for 6 or greater you will need 3.

Note:

These parts have a nominal interlocking clearance of .10mm. This fit is intentionally a little tight. Due to this it is necessary for your printer to be properly calibrated for dimensional accuracy.

Assembly

All connections are press fit, but if they are loose use a few drops of super glue.