30mm scope mounts - 9-11mm dovetail

Couldn't find a design to fit a 30mm scope to a 9-11mm dovetail rail, so made one. This seems to work fine for holding an old Gamo red dot scope to an HW40.

Two sizes included - normal and thin. I recommend the normal size. I printed both to test. The normal size is better.

Normal uses 4 nuts and bolts per ring, thin uses 2 per ring.

Normal is 24mm, thin is 11mm.

Print flat side down.

In the filenames, left = the bolt head side, right = the nut side.

Extra parts needed:

M5x25mm bolts (or longer)

M5 nuts

File info

Scope left.stl scope ring half, bolt head side. Requires 4 nuts and bolts. Scope right.stl scope ring half, nut side. Scope left thin.stl scope ring half, bolt head side. Scope right thin.stl scope ring half, nut side. Scope_normal_together.stl self explanatory. . Requires 4 nuts and bolts. Scope_thin_together.stl self explanatory. Requires 2 nuts and bolts.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.2mm

Infill:

Filament: eSun PLA+ Black

Notes:

Category: Sport & Outdoors