• Models
  • Contests
  • Slicer
  • Login
  • Start Here
    thingiverse-iconprintables-iconcults3d-iconmakerworld-iconmyminifactory-icon

    3D GO

    3D ModelsContestsCollectionsSaved ModelsOn a mobile device?

3D GO

Privacy Policy
Leaking rain gutters on the greenhouse 3D Printer File Image 1
Leaking rain gutters on the greenhouse 3D Printer File Image 2
Leaking rain gutters on the greenhouse 3D Printer File Image 3
Leaking rain gutters on the greenhouse 3D Printer File Image 4
Leaking rain gutters on the greenhouse 3D Printer File Image 5
Leaking rain gutters on the greenhouse 3D Printer File Image 6
Leaking rain gutters on the greenhouse 3D Printer File Image 7
Leaking rain gutters on the greenhouse 3D Printer File Image 8
Leaking rain gutters on the greenhouse 3D Printer File Image 9
Leaking rain gutters on the greenhouse 3D Printer File Image 10
Leaking rain gutters on the greenhouse 3D Printer File Image 11
Leaking rain gutters on the greenhouse 3D Printer File Image 12
Leaking rain gutters on the greenhouse 3D Printer File Image 13
Leaking rain gutters on the greenhouse 3D Printer File Thumbnail 1
Leaking rain gutters on the greenhouse 3D Printer File Thumbnail 2
Leaking rain gutters on the greenhouse 3D Printer File Thumbnail 3
Leaking rain gutters on the greenhouse 3D Printer File Thumbnail 4
Leaking rain gutters on the greenhouse 3D Printer File Thumbnail 5
Leaking rain gutters on the greenhouse 3D Printer File Thumbnail 6
Leaking rain gutters on the greenhouse 3D Printer File Thumbnail 7
Leaking rain gutters on the greenhouse 3D Printer File Thumbnail 8
Leaking rain gutters on the greenhouse 3D Printer File Thumbnail 9
Leaking rain gutters on the greenhouse 3D Printer File Thumbnail 10
Leaking rain gutters on the greenhouse 3D Printer File Thumbnail 11
Leaking rain gutters on the greenhouse 3D Printer File Thumbnail 12
Leaking rain gutters on the greenhouse 3D Printer File Thumbnail 13

Leaking rain gutters on the greenhouse

DIY.Mushroom.Tek avatarDIY.Mushroom.Tek

May 18, 2024

printables-icon
DescriptionCommentsTags

Description

ENGLISH: Leaking rain gutters on the greenhouse.

Cheap greenhouses usually do not have well-closed gutters at the ends. The silicone seals on mine were leaking.

In addition, the front foundation had settled so that there was no longer any slope to the rain barrels.

The sheet metal of the rain gutters had also warped so that the end plugs no longer worked.

As a solution, I designed a volume part, which, in contrast to the flat plug, can be sealed and fitted much better.

Attached chamfers allow for easy insertion and ensure the silicone is pushed evenly into the irregularities.

The lack of gradient is compensated by the increased water level in the rain gutter.

This measure was urgently needed because the summer in Germany is currently very dry, so that the loss of rain that comes from the greenhouses cannot be avoided.

Successful gardening!

 

 

GERMAN: Undichte Regenrinnen am Gewächshaus.

Billige Gewächshäuser haben meist keine an den Enden gut abgeschlossenen Regenrinnen. Bei meinem waren die Silikondichtungen undicht.

Zusätzlich hatte sich das vordere Fundament gesetzt, so dass keine Gefälle mehr hin zu den Regenfässern mehr bestand.

Ebenfalls hatten sich die Bleche der Regenrinnen verzogen, so dass die Endstopfen nicht mehr funktionierten.

Als Lösung habe ich ein Volumenteil konstruiert, welches im Gegensatz zu dem flachen Stopfen sich deutlich besser abdichten und einpassen lässt.

Angebrachte Fasen ermöglichen das einfache Einführen und sorgen dafür, dass das Silikon gleichmäßig in die Unregelmäßigkeiten gedrückt wird.

Das fehlende Gefälle wird durch den erhöhten ermöglichten Wasserspiegel in der Regenrinne kompensiert.

Diese Maßnahme war dringend nötig, da zurzeit ein sehr trockener Sommer in Deutschland herrscht, so dass der Verlust der Regenmenge, die von den Gewächshäusern kommt, nicht verzichtet werden kann.

Erfolgreiches Gärtnern!

 

 

 

License:

Creative Commons — Attribution — Noncommercial — Share Alike

Related Models

Cable Corners... keep cables in corners! preview image

Cable Corners... keep cables in corners!

muzz64 profile image

muzz64

30,955

Headset Hanger 2.0 preview image

Headset Hanger 2.0

RMTB profile image

RMTB

16,699

PetsTags preview image

PetsTags

Dominik profile image

Dominik

1,123

Universal Filament Filter and Lubricator preview image

Universal Filament Filter and Lubricator

CreativeTools profile image

CreativeTools

26,095

3D4U by Miele Coffee Clip preview image

3D4U by Miele Coffee Clip

3D4U powered by Miele profile image

3D4U powered by Miele

8,612

Simple Customizable Key tags  preview image

Simple Customizable Key tags

constantinost profile image

constantinost

158

SHARKZ... Fun Multipurpose Clips / Holders / Pegs with moving jaws that bite! preview image

SHARKZ... Fun Multipurpose Clips / Holders / Pegs with moving jaws that bite!

muzz64 profile image

muzz64

24,650

Mechanical wall clock preview image

Mechanical wall clock

Harald Andersson profile image

Harald Andersson

6,958