Multi-Color Filament Sample Box and Cards

A simple filament swatch and storage box - they're a dime a dozen! So what makes this one different? 

1. The lids have a satisfying slide and lock (via magnets) function so they don't come off accidently.
2. The lids have multiple colors for the body, “Filament Sample” text, and “Type” text! Just use the provided GCODE and be ready to swap filament (instructions below).
3. The swatches are simple and provide all the information you'll need - see photos for details.

Multi-Colored Lids

The GCODE provided for the lids has manually added M600 commands to perform filament color changes to create the above look.  If you do not want this effect, you need to use the STL files and slice the models yourself!

Instructions 

Both the PLA and PETG lids have the same five total color changes - and they happen in quick succession so be ready!

Using the example above, the order you'll change them in is: 

1. Begin with Silver (body)
2. Color Change 1: Black ("Filament")
3. Color Change 2: Red ("PLA")
4. Color Change 3: Silver (a bit of the body)
5. Color Change 4: Black ("Samples")
6. Color Change 5: Silver (back to body color for remainder of print)

Magnetized Closure

Two 8x3mm magnets are use to secure the lid to the body.  These aren't required, but give the assembly a quality, satisfying, and secure closure. 

Simply push these into place after printing - make sure the polarity is correct!

Fit and Function Tip

The lid/body sliding action will be rough and gritty fresh off the printer and after the support from the body and lid is removed.  Simply slide the lid rapidly on the body (or use sand paper to speed the process up) and everything will smooth out nicely.  My containers are now super smooth after a bit of use!