Reverse bowden bracket

I searched and printed several of those bracket avaiable and none was suitable for my setup.  I needed the feed to be from the side of the printer, not the top or the rear.  I also needed to clear my z-axis brace.  And finally I wanted to be able to screw a fitting on both side of the bracket in case I wanted to run a second bowden tube to the filament dryer without it being 1 single tube from dryer to extruder.

The bracket is mounted on top of the z-axis brace, between the 2 screw on top the side members.  There is a feature to center it in the v-slot of the extrusion and two recess to clear the screw heads.  You can alternatively mount it anywere else in a v-slot.  Use a m4 screw and t-nut.

I printed it with 0.2 layer height and 75% infill.