January 15, 2023
Description
This is my approche on a League of Legends Ward. The design is closely related to the classic ward.
The ward has a little 2W LED lamp inside so it can be used as a moodlight.
The crystal ontop can be removed to replace the lamp inside, wings can also be removed and are designed with a simple slide-in-mechanism.
Only the “Top” piece needs to be glued to the "Mid" piece.
The following parts are needed:
1x Top
1x Mid
1x Crystal
1x Lid
2x Wing
I printed every part with 0.2mm layerheight exept the crystal which was printed in 0.1mm.
The whole assabled ward is around 30cm high and 37cm wide.
If you give this print a shot, please share your results on this page :)
The electrical connections are also pretty simple:
Electronic parts used:
1x Lampholder https://www.amazon.de/gp/product/B01IAQNIZE/
1x Lamp https://www.amazon.de/gp/product/B0915S2J25/
1x Powercord: https://www.amazon.de/gp/product/B07NSSHP9S/
1x Switch: https://www.amazon.de/gp/product/B08SHMXWCH/
License:
Creative Commons — Attribution — Noncommercial