Chili Cook-Off Trophies

I was asked to design some trophies for a chili cook-off and these are what I came up with! I used two thingiverse models to help with my design: the column and the pepper. 

Neither trophy needs any support, and both were printed at 40% @ .16 layer height. The pepper trophy was printed Without the green pepper topper. Then, I glued the topper in place with CA glue. Similarly, I printed the star trophy without the topper and then glued it in place; however, it can be printed in one go. I used the filament swap feature in Cura to change colors and minimize the number of pieces. 

These were a huge hit! Feel free to adapt them for any trophy needs you may have. 

Please post a photo and leave a like if you happen to make or download my designs. It really helps out makers on Printables. Also, If you enjoyed the design and feel so inclined, feel free to leave me a little tip. Everything goes back into my 3D Printing Habit.

Thanks!

If you need some good PLA Pro, this is an affiliate link to my favorite brand (for the price). https://amzn.to/3RoHCiA It won't cost you more, but it will help me out!