September 6, 2022
Description
Based on the Original Hexabox, this one takes only 77g of material and 3.5hours per unit vs the nearly 200g and 11 hours of the original. Modified in Fusion 360. Removed the majority of the interlocking surfaces as it is very thick and very time consuming to print the intricate Interlocking Hex walls.
Print with 20% infill and your choice of materials.
No Supports.
Inserts, Knob and screw unmodified but included for convenience.
Inserts need to be oriented correctly (rotate 180 deg.)
Knobs and Screws need to be Oriented (rotate 90 deg.)
All due credit to Mario (https://www.printables.com/social/12647-mario/about) and the original creator of “The Hive”.
License:
Creative Commons — Attribution — Noncommercial
9
SemperDiscere
