July 20, 2023
Description
I was inspired by the Revopoint automatic dual-axis turntable, and designed this manual one.
The separate ring is for easy printing and eliminates the need for support.
The base and dome do not require much infill - I used 4%. For smoothness of the inside of the base and the dome, I suggest using up to 0.15mm layer height.
To increase friction between the dome and the base, I added some masking tape as shown in the pictures.
For long-term use, I suggest super-glueing the ring to the dome.
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
0.15mm
Infill:
4%
Notes:
Obviously, flip the ring and dome for printing without support.
License:
Creative Commons — Attribution
8
Yi Yu
