Dust Removal Cyclone

Everything threads together and it has space for a HEPA filter at the outlet component.

This part of the design has not been thought out very well so I will likely implement a slide in attachment for the HEPA filter for future use.

There are grooves in the bottom and the top of the middle yellow section to lay down a thin bead of silicone to allow for an air tight seal.

The inlet accepts a 1-7/8" Rigid vacuum hose start connection and the outlet accepts the end connection of the same hose.

Also included is a 1-1/4" hose adapter to adapt it to a 3/8" push connect fitting (See Picture 8). This in turn connects to the suction head on my CNC for fiberglass dust removal. This part is obviously focused on removal of fine dust and not on larger chunks.

HEPA Filter used in the design is a Chuwi ilife HEPA filter:

https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20220905190720&origin=y&SearchText=Chuwi+ilife+HEPA+filter&spm=a2g0o.detail.1000002.0