No support needed, 0.20mm resolution, PLA is fine :)
Pauses and color change
Use the gcode files for Prusa mini : pauses and switch of PLA color are prepared
Otherwise :
Make a pause a 0,1mm before the end of Wheel.stl to insert the 8 magnets (with glue): be careful to insert them in the same orientation on all the holes, then finish the print
Make a pause and change PLA color on letters on Wheel - face.stl and Box - face.stl
Assembly
Glue Wheel - face.stl with Wheel.stl
Insert the 608ZZ ball bearing in the assembled wheel
Glue Box.stl with Box - face.stl
Insert the wheel in the box
Glue 1 magnet with Stopper.stl : be careful to glue it in the right direction
Align 1 word correctly, add a bit of tape so it won't move
Glue the stopper with the magnet on the back of the Box, alining it with one of the magnet of the wheel
Print 2 Stand.stl for displaying it on your desk for extra stability, glue them on the box bottom
Roll the wheel and enjoy !
PS : Trans women are women !
PPS : My no-remix policy for this project can be discussed upon the goal of your project. If you want to create a remix to empower or support a minority of people (= not cis white straight dudes), drop me a message !
hellgy
