September 6, 2022
Description
A PSU-mount for the Atomstack A5 Pro laser engraver. I assume it also fits on the non pro.
Makes it a little easier to put it aside.
PSU-dimensions are ca. 113x50x33.
Mount it with some short M4-bolts and T-nuts. Check if it fits before mounting. You have to bent it open to place the psu inside the mount. Print it as it is placed in the stl.
Happy lasering :)
Rafts:
No
Supports:
Yes
Notes:
1.2 mm walls will work, 15% infill. PLA worked fine for me.
Category: HobbyLicense:
Creative Commons — Attribution
8
Coat
