Vise Jaw-covers, customizable

Customizable Jaw covers for your vise.

• You can add a horizontal groove or multiple vertical grooves. The width of this grooves is the width at the surface of the jaw-cover. Depth is this width/1.414 (last is square root of 2).
• The height and the depth is the same, so you can also use the flat side.
• You can add magnets in the corners to keep the covers better in place when you placing your workpiece.
• Don't forget to add some tolerance at your measurements.

If the TV-customizer doesn't work, OpenSCAD has a pretty decent one built in.

Happy vising :)

Look for more tools and the like here: https://www.thingiverse.com/Coat/collections/coats-toolbox

---

More information about the fantastic and challenging program OpenScad can be found here: https://en.wikibooks.org/wiki/OpenSCAD_User_Manual

You can download the free and opensource OpenSCAD here: http://www.openscad.org/downloads.html

Category: Tools