Death Egg

A weapon for Darth Bunny.

Of course all the credits goes to Plainolddave (https://www.thingiverse.com/thing:117733).

I scaled the Z for the bottom with 115%, the ring in the middle with 150% and the Z for the top with 140%.

The X and Y are the same as the original.

All the parts are in the same STL.

Print it at about 43% for chicken-egg-size (60 mm)

Happy egging :)

I printed it at 60% and with 15% infill, no support

if you have bad bed adhesion, print the location pins separately with a brim, altough you don't really need those pins.

Category: Models