September 8, 2022
Description
Print Settings: These setting apply to the solid, tested, parts, not the flexible feet.
Printer:
Tested with Prusa MK2S+
Filament:
PETG or PLA
Tested with PETG.
Layer Hight:
0.3
Infill:
20%
Grid
Exterior Perimeters:
4
Brim:
No
Heated Bed:
Recommended
Supports:
Recommended, but possibly not necessary for the base when printing with PLA.
Approximated Filament Usage:
91.04m. Not including feet.
Approximated Print Time:
17 hour. Not including feet.
The feet should be printed out a flexible filament of your choice and convenience. This is for the sake of adding friction, but this feature is as of yet untested, so I encourage you to experiment and post makes. P.S. post processing might be necessary to make the feet fit, depending on your flexible filament's shrinkage.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
PealPrint
