Revo Micro Mount 3D Stripes (Edition 2) Original Fan + Original Bowden Coupler

//Which file to choose :

1) Mounting Option:

1. Nut version
2. Threaded insert version
   • needs 4x M3 threaded inserts, preferably short ones
   • Fasteners that go through the fan also screw into threaded inserts, instead of plastic

2) Want to cut off the olive on the PTFE tube?:

1. YES - take any file withing the normal folder
2. NO - look for files within the OBC folder
   • you will keep the bowden coupler that came with your Prusa Mini
   • 5mm long piece of PTFE tube necessary

//Information

This is my remix of the Revo Micro mount (Edition 2) from E3D. I redesigned the whole front to better blend in with the x-carriage of the Prusa Mini. I also had a little bit of fun with the design as to not be too boring.

I uploaded model files and also pre-sliced gcode. If you choose to slice them yourself, don't forget to add the support enforcers.

Lastly, I also supplied a version of my design that retains the original bowden coupler that keeps the olive. No cutting of the PTFE tube required, you can screw in the stock bowden coupler. :) 

Files are found in the original bowden coupler (OBC) folder. It's necessary to cut a 20mm long PTFE tube piece from the tube that came with the Revo Micro and insert it into the Revo Coupler. It will fill the space between the original coupler and the hotend.

//Print settings:

Same as E3D model:

• 0.4 nozzle
• 0.2mm layer height or less
• 40% infill
• 3 perimeters (walls)
• 5 top/bottom layers
• support enforcers