Potion of Time - Mythic Potions

For a commercial license, please visit our website to become a Mythic Merchant: 
https://arsmoriendi3d.com/mythic-merchant/

UPDATE 1: Added a peg version and remade the roman numerals as there was an error with the order of the numbers.

The bottle and ring of clock hands are two separate pieces, designed to interlock and make them rotatable.

Choose one of three options to print the Potion of Time:
1: Print in place, the two pieces are interlocked permanently (combined).
2: Print pieces separately and press together with force. Locks together permanently. We received feedback of this working, but we can't guarantee it will work for everyone as print settings and filament varies a lot (press fit).
3: Print pieces separately and lock them together. Can easily be disassembled again (peg).

If you print the combined model, keep an eye on the first few layers and assure there's no "elephants foot" happening so the two parts accidentally fuse together. We experienced a single point that was fused together, the first layer where the nozzle starts and stops the layer, which could be separated carefully with a sharp knife.

The lid prints in two parts, attach the ring into the sockets one at a time.

The Potion of Time was community chosen and part of the Mythic Potions Kickstarter. The idea was suggested by Timothy Loatman who you definitely should check out! His Instagram is full of gorgeous models that he prints, paints and even designs himself. Everything of DOOM, which the small skulls on the potion bottle is a reference to :)
https://www.instagram.com/timothy.loatman/