COVID-19 RC3.2 8 piece with 0.15 layer heigth for chamfers, 2 perimeters and 5% infill

This is modification of the Prusa Protective Face Shield - RC3.2 - stack versions. It has added layer height modifiers to decrease the layer height to 0.15 for the bottom chamfers on each part. It only affects first three layers of each part. The custom G-code for first three layers of 2nd, 3rd and 4th part has also been realigned. The rest of the model is still printed with 0.25 layer height. This resolves poor layer adhesion for overhangs on inside of curves.

Provided project is only for Original Prusa i3 MK3/S printers. Do not run the G-code on other printers. Risk of damage.

The printer will be running at increased speeds. Expect louder operation and make sure your printer is in good shape before running this. Check the Maintenance guide.

Print instructions

Supports are included in the model.
The model is optimized for a layer height of 0.25mm.

Ideally, print it using PETG.