Handsfree while you watch Youtube!
Do you dread the risk of carpal tunnel syndrom because you have to hold your phone while watching videos? No more! Print your own “CKPS 9000” and watch away.
Customizable to your needs
If the pre-made models are not enough for you, you can customize different parameters to fit your needs.
- Got a huge case to protect your phone? Check, you can increase the width of the notch.
- Want to add your phone number or address, in case you loose your keys? Check, there is an option to add a label. Fair warning: It might not be the best idea to tell strangers where the locks for the keys are they just found.
- You don't need a hole for a key chain? Check, you can just disable it.
- Do you want to use it with a bottle opener? Check, there is an option for it.
- Do you want to use the bottle opener with a washer or a coin? Check, there is also an option for it.
- You will need to measure your washer/coin to get a tight fit and glue it into the opening. Additionally you will need to increase infill and perimeters for better stability/sturdiness.
See the photos for a list of all parameters.
If you want to customize the model, you will need
- OpenSCAD
- the BOSL library (download here, instructions how to install that library can be found here)
Slicing
Example in the photos was printed with Prusament PETG, 15% rectilinear infill, no supports. Orientation was kept after loading.
Updates
- 2022-11-13
- added option for bottle opener (enabled by default)
- fixed necessity to remove first layer in slicer
- fixed a few bugs with customization (e.g. the notch was not moving with width)
seasick
