September 12, 2022
Description
Printed in PolyMaker Gold PLA.
Printed with standard 0.4 nozzles settings, 15% grid infill, and supports (I would recommend a raft for a smoother bottom half as well)
This is based off my max height Roe (7 ft) and designed at half size to make it easier to fit smaller printers and show greater detail. For example it should be scaled up to 166% for someone 6 ft tall. To figure out how to scale it ("height in inches"/74)*200.
The the one pictured is printed at the original size. I've printed test models at 50% that show less detail, but still spin if you have a smaller printer :) The inner ring does not move in the one pictured. However, this file has been updated and it should work (I'm 90% sure. I printed out a bunch of test sizes and had different saved models and this one one of the more recent ^^;;).
These are printed separately, with the inner rings inserted into the outer ring model to waste less pla on supports.
Anyway, enjoy!
License:
Creative Commons — Attribution — Noncommercial
uwustwations
