February 9, 2024
Description
Simple hexagon shroud for your Delta-P fan modded MK3S+ 5015 part fan.
Had part fan crack slightly when tightening too much and screw head going in the fan hole, so I created should for the fan.
Fully support free.
Optimized dimensions for 0.2mm layer height @0.4mm nozzle.
Mine is PET-G, but PLA should be just fine.
Gcodes only for Mini but I included 3MF and STL.
Also check out the V2 remix Soulrider911 did
License:
Creative Commons — Attribution — Share Alike
7
OeschMe
