Soda Can Silencer Prop Adaptor

Pretty much just for fun, an item for aesthetics.

Little part to fit a standard coke can to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included.

This is to make something that looks cool, rather than a real useful item. While a can might have a large air volume, and while there is an impact on the noise level, a drinks can won't really function as a very useful sound moderating device compared to any other design and should not be treated as such.

The ridge lines are just for gripping, I've added files which are smooth if you dislike these.

Most printers can print 70 degrees overhangs, so you probably don't need to print with supports. The actual angle is 68.5 degrees, which should be doable.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

No

Supports: 

No

Resolution:

0.2mm

Infill: 

20%

Filament: eSun PLA+ Black

Notes:

Most printers can print 70 degrees overhangs. If yours can, don't bother with supports.

Category: Sport & Outdoors