September 14, 2022
Description
Tiled Wolverine Claws
=================
I have remixed them from "Wolverine Claws in plastic" by user "chefmaki". I really liked this claws and my cousin wanted to have a pair of them for a costume party, but unfortunately they don't fit on most delta-printers because they are too large. No problem, tiled claws to the rescue!
I suggest printing them from ABS
...so you can glue the "dovetail"-part later with acetone.
Also uploaded the scad-file and the original STLs from chefmaki, because they are needed for modification on the scad file.
Made from silver/grey ABS (ABS is suggested here because you can glue then together with acetone).
You might have to cut the dovetail-section down a bit, because the tiles of the claws have been seperated in software without a gap!
for one complete "Claw" you need
License:
Creative Commons — Attribution — Share Alike
zeus
