📇 Card slots + hanger for z-axis-top (for i3 MK3(S+)

Info:

• original z-axis-top holder (right side) with:
  • 2 SD cards holder slots
  • hanger for anything you like
    • like for scraper/spatula
• minimalistic addition
• the part is pro-longed to the side, so anything hanging on it does not collide with Z axis
• note that using mirror to have it on the left side of the printer does NOT make much sense, because on the left it would collide with Z axis stepper motor
• given part is compatible with MK3, MK3S, MK3S+
• note: card slots are using maximal possible space below the surface so it does NOT collide with Z-axis, even if it goes to maximum (above 210 height)

Print instructions:

• as recommended for original parts:
  • 2mm layers
  • 20% grid infill
  • PETG
  • Prusa profile 0.2mm QUALITY

Installation:

• the replacement is quite easy, just unscrew 2 bolts
• place new part
• and tighten it back

What to hang:

• ideal also for https://www.printables.com/model/277302-round-scraper ;)