September 19, 2022
Description
This magnetic door stop is a very small and unobtrusive solution to stop your door from opening too far. It's a remix of the awesome model by mishkin2. I changed the shape to my liking and increased the tolerances to be a little easier to print (at least on my machine).
With the neodymium magnets I used it also does a good job holding the door open if you don't want it to close on its own again.
It uses two 10x2mm magnets and a bit of double-sided tape for mounting.
Components:
- 2 disk magnets 10x2mm
- double sided tape
Here's how it works:
License:
Creative Commons — Public Domain
flarrellek
