Raspberry Pi Camera IKEA JANSJÖ mount

Raspberry Pi camera mount for IKEA Jansjö USB LED light. The suggested use is for connecting to 3D Printers for use in Octoprint / Mailsail / etc!

NB: This is for the flexible USB light, not the version with a base (now discontinued). This is the version I used (still made)… https://www.ikea.com/gb/en/p/jansjoe-led-usb-lamp-black-70291232/

It is designed to fit onto the cylindrical section behind the light. Slide it over the flexible section and slide forward. There is actually a small chamfer designed into the model to match the light. The camera affixes to the print using 4 (or just 2, as pictured) M2 x 4mm self-tapping screws.

Also featured in the images are my TPU camera cable guides, see… https://www.printables.com/model/264754-raspberry-pi-cable-clip-ikea-jansjo-usb-led

NB: I designed this to fit a Chinese knock-off Raspberry Pi camera. You know the ones, under £3 on AliExpress (I'm a bit too skint to buy 6 of the real ones for a total of £150, sorry Raspberry Pi Foundation!)… https://www.aliexpress.com/item/32538935378.html?spm=a2g0o.order_list.0.0.57ed1802qlOJwP