September 19, 2022
Description
The model was printed in PLA or PETG, 0,4mm nozzle. So that the partly very small parts (rotors, drone ) adhere to the print bed, the 1st layer is printed at 12mm/s and, if necessary, the print speed is reduced to 50% via the fine settings on the printer. The parts can also be printed with a border.
The parts of the drone, top and camera are glued together with super glue. The rotors can be glued or plugged on. Maybe the holes have to be widened a little bit.
License:
Creative Commons — Attribution — Share Alike
Thommyfix
