September 16, 2022
Description
As I mentioned in my reference model description, if you are not careful when disassembly you can damage the micro SD card slot if the micro SD card is not ejected during disassembly…
I needed a retaining perimeter to hold the SD card in its slot, and I created this file. There is a lip on the front, and a tab on the back to prevent the retaining profile from sliding off the camera.
Printed in white PLA+, 0.4 mm nozzle, and 0.28 mm layer heights. No supports required.
License:
Creative Commons — Attribution
10
Ostella3D
