Info:
- another model for valve cap - for schrader valve (the type used in cars)
- changing colors via color change (no MMU needed)
- for flags with
- horizontal stripes
- vertical stripes
❗ Not for presta valve!
Print instructions:
- 0.4mm nozzle works good for me (for my MTB), so just print this at 100% scale or adjust slightly if it is too loose or tight.
- 3mf file contains variable layer height, bottom part must be 0.05 layer height so the thread works well
- no supports
- you can choose your own color changes for various stripes, i have added most common
License:
Creative Commons — Attribution — Noncommercial
sh
