Wallet SD Card and Micro SD Card Holder

I wanted an SD card and micro SD card storage that would fit in my wallet. I couldn't find anything that matched. So I modeled the following in fusion 360. Below is the criteria that I was looking for.

1. Fit in my wallet (4.4mm thick)
2. Printed fast
3. Stored as many SD cards and Micro SD cards as possible
4. Everything was pressure fit including the cards and the case
5. The case can be separated without sliding the entire cover

The models were printed with a 0.4mm nozzle and a 0.2mm layer height using PLA.

Soloo