GEN2 185 Classic Drawers - All

⭐ Love the GEN2 system?
Support the project by joining the Jerrari Club or picking up a premium faceplate collection, it means a lot and helps fuel future designs.

The GEN2 Modular System is a 3D printable storage solution offering ultimate flexibility and customization. Perfect for home users, hobbyists, and small businesses, so you can print exactly what you need and customize every piece to fit your space and style.

Unlike store-bought sets, GEN2 lets you print only what you need and expand your setup whenever you want. The drawers snap together seamlessly, giving you unlimited expansion possibilities. With the unique QuickLock mechanism, rearranging or relocating drawers is quick and effortless, so your storage can grow and adapt with you.

CLASSIC DRAWERS
These one-piece drawers print with the handle built in, no assembly needed. They’re quick, simple, and ready to use right off the bed. While they offer convenience, they don’t allow for the same material savings or faceplate customization as the Decor series.

185 Collection

The 185 Collection offers decent storage volume while also maintaining compatibility with the widest range of 3D printers. Find all compatible 185 collection models here HERE

STEP 1: Location

Decide how you would like to use your GEN2 storage. Keep in mind that the drawers are modular and can be easily swapped between under table and table top locations. All drawers are available for mounting under the table using rails, but you can also place them on top of any surface with table top kits.

Find these kits at JERRARI3D/gen2-modular-system

What You'll Need

GEN2 Case - GEN2 Drawers fit into GEN2 Cases of equal size, you can find the matching case for your drawer here:

Visit Jerrari3D.com for a list of all compatible drawers and cases.

Understanding Part Names
GEN2 drawers are titled by length, width and height, such as in this example.

HARDWARE

Includes affiliated links to help support my projects
• Filament - PETG or PLA
• Screwdriver
• Magnets (Optional): 10x2mm or 6x2mm
• M3 nuts and screws: Stainless-Steel or Steel
 

UNDER TABLE (GEN2 RAILS) HARDWARE
 • Countersunk woodscrews: (SAE: #6 or #8 up to 1/2" or longer) or (Metric: 3.5x16mm or longer)
• Drill bit that is smaller diameter than the wood screws (My Recommendation)
• Pen, Marker, or Scratch Awl (for installing under tables)
 

INSTRUCTIONS

This model includes helper disks that help with bed adhesion. They can be easily removed by hand or toggled off in your slicer if not needed. Printing with cheaper filaments in a non enclosed printer may be challenging to prevent warping with a print of this size.

🔧Visit Jerrari3d.com for Step-By-Step Instructions

For basic instruction on assembly please check out the above videos

UPDATE: 

• NEW Magnet Clip - This replaces the magnet slots with a more reliable and universal design.

Tip:

Printing large models near the edge of a printer's build plate can sometimes lead to edge curling up deforming the rail. Here are some ways you can combat this:

- Clean your entire build sheet using detergent or 99% iso alcohol, additional adhesion can be achieved with glue sticks or adhesion promoters like Nano Adhesive
- Print with an enclosure to prevent drafts and cooler temperatures, preheat the enclosure for a few minutes prior to printing.
- After the print completes wait for the build plate to lower to room temp before removing the model.
- You can always print with materials that print easier and warp less during printing such as PLA

Please note: The Non-Commercial license refers specifically to selling prints. You're absolutely welcome to use my designs in commercial environments—I actually encourage you to use them anywhere you see fit! 👍