Switch Wall Mounting Box 86x86mm

The operation of my roller shutters was still with mechanical surface-mounted switches and I wanted to replace these with a WiFi roller blind switch. The problem was that I couldn't use a built-in switch (I didn't have a hole in the wall), while the internet was full of built-in switches.

The surface-mounted cabinets that were available on the internet didn't look good either, so I decided to design and print the cabinet myself.

I had already connected all switches (without a box) to test them and didn't really want to cut off the power again to mount the switches in the boxes. Ultimately, the design has become such that if the switch is turned under approximately 45° and tilted slightly, it can be mounted through the box with connections and all. The cables mounted on the wall can pass through the two recesses. These are suitable for cables up to max. Ø7.5 - Ø8mm