Skadis Pegboard keyboard holder v1.5

UPDATE Oct 24: Now in 30% / 3u size and with rounded corners for a rounded look. Functionally the same, just a slightly different look.

An easy and very fast to print Skadis pegboard keyboard holder in different sizes. Can hold heavy keyboards! The red candybar in the pictures weighs 1,8kg and its not a problem. If yours weighs significantly more, print three if you like.

The keyboard stands at 65degrees, so pretty right up, so you can see the keyboard very well and it doesnt want to slide off, so no lip on the front is needed. 

• XS - for 30% keyboards, 3u in height, up to ~75mm case height (depth, not thickness)
• S - for 40% keyboards, 4u in height, up to ~90mm case height (depth, not thickness)
• M - for 60% keyboards, 5u in height, up to ~125mm case height (depth, not thickness)
• L - for 75%+ keyboards, 6u height, up to ~150mm case height (depth, not thickness)

Regarding size: Also slightly larger keyboards fit on the smaller sizes. For example the 4u Boardsource Technik (Planck-like) in the picture is also fitting fine on the 3u size.

Print settings:

• 3 or better 4 perimeters, if you are concerend even more
• 20%+ infill

Prints in about 35min per pair of small stands.